Main contents of quenching machine tool management Release time: September 26, 2019 11:07 Views:
The quenching machine tool and induction heating power supply cooperate to realize the induction quenching process controlled by program. It is commonly used for quenching and heat treatment of gears, bearings, shafts, valves, cylinder liners and various mechanical parts. Quenching machine can be divided into vertical and horizontal structure. Users can choose quenching machine according to quenching process. For special parts or processes, special quenching machine tools can be designed and manufactured according to the requirements of heating process.
Lubrication, maintenance, rational use and standard transfer system are the main contents of quenching machine management. The quality of the machine tool and the quality of the lubrication personnel are the important factors affecting the quality of the machine tool operation. Through the training of operators of quenching machine tool, the principle, performance, lubrication position and working mode of quenching machine tool are systematically studied, which lays a foundation for better use of the machine tool. At the same time, in the use and management of quenching machine tools, a series of practical and effective measures have been formulated. It is directly related to the economic interests to clarify the responsibility of the operator. For each accident, the equipment chief mate shall organize the equipment personnel, maintenance personnel and technical backbone to analyze the accident, determine the main responsible party and the non main responsible party, and arrange the post maintenance work to ensure that the normal production schedule is not affected. According to the claim method for abnormal damage of production materials in the factory, criticize and educate the person in charge, and impose certain economic punishment. Strengthening the daily maintenance of equipment is another important content of quenching machine tool maintenance. The operator must check the oil transfer record before work every day, then check whether there is any abnormality, observe whether the automatic lubricating box of the equipment has run out of oil, and then operate manually several times to increase the oil quantity. Under normal conditions, after a few seconds, the lubricating oil should flow out of the machine tool guide rail, and then manually inject the oil into other parts, accessories and other oil holes of the machine tool, especially the piston parts connected with the central pull rod of the hydraulic chuck. If they are not used for a long time without maintenance, it is likely that the clamping stroke can not be adjusted again.