Correct operation of CNC quenching machine tool Release time: 14:18, July 3, 2019 Views:
Quenching machine tools generally refer to special machine tools which use induction heating power for quenching process. It has the advantages of high precision, good reliability, saving time and labor. There are many kinds of quenching machine tools, according to different classification can be vertical, horizontal quenching machine tools, CNC quenching machine tools.
The CNC quenching machine adopts frame type welding bed structure, double-layer precision worktable, and the upper table moves. The upper working table of the machine tool is driven by ball screw and driven by step motor. The moving speed is stepless and adjustable. The speed of parts rotation is controlled by frequency conversion speed regulation, and the speed is stepless adjustable. The clamping length of the parts can be adjusted electrically to adapt to the change of the length of the quenched parts. It can store more than 20 kinds of parts process program.
CNC quenching machine has manual operation and automatic operation function, which is suitable for single and batch production of parts. It is widely used in induction heat treatment field of tractor, automobile, construction machinery and machine tool industry. Reasonable structure, complete function and convenient installation and debugging.
At the same time, it is used to quench, quench and quench all kinds of shaft parts, such as CNC, continuous quenching, quenching and so on.
CNC quenching machine tool is easy to use and easy to learn. The following is the operation method of Zhengzhou Xingchuan Induction Technology Co., Ltd
1) Start up: first turn on the power switch and check whether the switch positions of the CNC system are normal. If everything is normal, select the corresponding main function.
1. Prgrm main function: program writing, editing and other functions.
2. Main function of Opera: it can provide various operation and electrical control of the machine tool, such as: automatic circulation, manual continuous upgrade, MDI mode, etc.
a) Manual mode: Press - X and + X keys to make the machine move up and down. The knob (top lifting) on the operation cabinet can adjust the position of the center, which is convenient for the parts to be clamped. The lower center can rotate according to the speed set by the frequency converter, (heating) controls the heating power supply, (spraying) controls the operation of the spraying solenoid valve. B) automatic method: install and clamp the workpiece, manually make the machine tool in the initial working position, and select the corresponding plus
Press the (start) button to automatically complete the quenching process. In case of failure, press the (stop) button.
Attention: when operating in automatic mode, the manual operation knob should be restored to its original position, and the operation knob during automatic operation should be avoided to prevent misoperation. After the (emergency stop) button is pressed, the (reset) key must be pressed to release the (emergency stop) button.
c) Adjustment of rotation speed: adjust the frequency converter knob to make the frequency appropriate according to the process requirements.
2) Shut down: turn off the power switch after work.